Categories
Home Network

Home Network Rebuild: Early April 2016

Over the past couple of months, I have slowly begun collecting the pieces of equipment necessary to revamp my home network for higher performance, customization, and reliability. Working for home 3-5 days a week, I need rock solid connectivity. My efforts are starting to show progress, despite some fairly significant work remaining (mainly around wiring the house).

The Router: Ubiquiti EdgeRouter Lite

The first piece of my Home Network rebuild and while there is a learning curve on the setup, I have it successfully configured for dual-stack IPv4/IPv6 on Comcast with a 150Mbps/12Mbps connection and I am going a month plus without rebooting it once. It’s amazing how well it works once it is setup.

Purchase: Ubiquiti EdgeRoute Lite for ~$96 @ Amazon.com

The Switch: Dell PowerConnect 2816

I had some basic requirements for the ethernet switch that would act as the central hub for my home network:

  • 16 or 24 Gigabit Ports.
  • Managed switch
  • Fanless
  • Rackmountable
  • Supports link aggregation
  • Low power
  • Low cost

After looking around, I decided to go cheap with the switch to fill my more limited near-term needs. I purchased a used Dell PowerConnect 2816 off of eBay for $49.99. Other than being used, it fits all of my criteria. Worst case, if I ever need to upgrade or the switch dies, I’m only down $49.99.

So far, the switch is holding up well. The web UI looks like it came from 2002 and there is no encryption to speak of, but I can live with that for now.

Only issue I have had was my Apple TV 4th generation not detecting the ethernet network or obtaining an IP address from DHCP for over a minute after startup. I found a blog post about PowerConnect switches and slow login issues. Turns out Spanning Tree Protocol (STP) can slow down a network port’s activation. By enabling the Fast Link functionality in the switch’s STP settings, my Apple TV now instantly connects to the network when waken up. I activated this setting for every port on the switch that didn’t have a router or a switch connected to it.

Wi-Fi: Apple Time Capsule

My ultimate goal is to purchase an Ubiquiti UniFi AC Lite access point, but we’re not there yet. For now, I have my Apple Time Capsule running in bridge mode. It still handles the Wi-Fi and Time Machine backup duties, but nothing else. It’s amazing how stable this setup is now the Time Capsule isn’t handling DHCP and firewall duties.

What’s Next?

  • Cable Runs: I need solve the problem of running ethernet cable from my 2nd floor (where my home office is being renovated) to my basement. I have a possible solution for this by running cable down the wall that surrounds my chimney, but need to fish the cable through there.
  • Network Rack: If I am going to run cable, I need to pick where the network rack is going to be located so I can rack mount all of my new equipment. I’m eyeing a location underneath my basement stairway that is currently unused space and is right next to the chimney I mentioned above. However, there is no power there at the moment.
  • Patch Panel: I should do this right and run all of this cable into a patch panel, to make rewiring my switch very easy.
  • Wi-Fi Access Point: As mentioned above, I’m looking at Ubiquiti’s AC Lite access point. I want to mount it on 1st floor ceiling at the center of my house, with a Power over Ethernet (PoE) working, for maximum coverage.
  • Network Attached Storage (NAS): I’m looking at a Synology NAS DS416j to handle a number of services, including logging and backups. This is probably the final step of my home network buildout and we are fairly far away from this purchase.
Categories
Technology

The Nerd Handbook

This classic Rands in Repose post explains a lot why I’m into so many projects right now outside of work. Nerd’s always have to be building and tweaking. It also explains why the recent changes in the past six months have made me so much happier and productive…I wasn’t getting time to work on these types of projects.